Calling all balanced output enthusiasts.
Based on RC-SE1, the new RC-SE1B swaps the 3.5mm jack out for a 2.5mm 4-pole plug. With its separate left/right channel wires and separate +/- signal transfer, the RC-SE1B enables balanced operation for your earphones. When connected to a balanced headphone amplifier, RC-SE1B can greatly enhance channel separation as well as markedly increase the signal to noise ratio. This results in a wider sound stage and more controlled, textured bass - perfect for balanced output enthusiasts.
A little extra transparency makes for a lot more individuality
From the plug joint, to the Y splitter, to the earphone-side connector, the new RC-SE1B is wrapped with transparent polycarbonate to separate itself from the unicolor cable. Not only does this striking visual element give your earphones some character, it naturally also invites you to take a closer look with its revealing view of the insides.
Stunning looks backed by impressive internals
The RC-SE1B adopts Teflon FEP (fluorinated ethylene propylene) for the sheath and silver-plated copper as the conductor. 11 strands of silver-plated copper wires (each with a diameter > 0.08) make up each of the 8 separate cables, which are all woven into one audio cable with separate wires for the left/right channels. Both the straight 2.5mm plug and the coaxial type MMCX connector (with a 2.4mm diameter) are made of gold-plated copper. These premium choices of materials ensure the RC-SE1B is a high quality cable that is highly elastic, tough against scrapes, and resistant to aging.
Boundless compatibility
RC-SE1B not only is compatible with the Shure SE215 / SE315 / SE425 / SE535 / SE846, but also fits many other popular models including, but not limited to: the Ultimate Ears UE900 / UE900S, and the JVC HA-FX850 / HA-FX1200. This wide compatibility ensures the RC-SE1B can satisfy many listeners' need for a unique yet stylish cable.
Product Specifications:
- Length: 120cm (excluding the plug)
- Diameter of conductor: 26AWG(0.4mm)
- Diameter of conductor including outer skin: 0.6mm
- Diameter of cable: 2.5mm
- Impedance of single channel for headphone cable: 0.16 ohm (1.2m)
- Suitable temperature: -80-200C
- High pressure resistance: 150V
