Rockford Fosgate R600-4D Prime 600 Watt Class D 4 channel Amplifier - OPEN BOX

Item # RFFSR6004DOB (Part # R600-4D)
Discontinued
Open Box Closeout
and choose One-Day Shipping at checkout.
Item Description:
The PRIME R600-4D is an ultra-efficient 4-channel amplifier producing 150 Watts into four channels at 2-Ohms. Run a 4-way full-range system or use it with components on the front channels with subwoofers on the rear.

***OPEN BOX***

 

This OPEN BOX  product you are browsing has been inspected by our qualified technicians to ensure that it meets factory specifications and includes all factory packed accessories. It is guaranteed to be in perfect working order but it is sold in "AS IS" condition (for example, the box may be torn, there may be cosmetic scratches, etc), returns will not be accepted unless the item is found to be defective. Please contact us with any questions BEFORE placing an order. We accept PayPal and all major credit cards. We do our best to describe each item we are selling to the best of our ability. Bear in mind that the item is sold as-is.

                                                                              

Use the "contact us" page to request additional information or images on this product

600 Watt Full-Range Class-D 4-Channel Amplifier
The PRIME R600-4D is an ultra-efficient 4-channel amplifier producing 150 Watts into four channels at 2-Ohms. Run a 4-way full-range system or use it with components on the front channels with subwoofers on the rear.

The Prime R600-4D amplifier offers high efficiency through the implementation of its Class-D circuitry while being able to power a full-range system. This amplifier is optimized for 4-channel front/rear systems so you can run midrange/tweeters in the front doors/dash while running midrange/tweeters in the rear doors/deck. Match with a mono amplifier for subwoofers and you'll have a Rockford Fosgate system that any Car Audio Fanatic will envy.

Product Features:

  • 12dB/octave Butterworth crossover
  • RCA pass-thru outputs
  • Tri-stage protection covers thermal, over-current and short circuits.
  • On-board Punch EQ with +18dB boost at 45Hz.
  • 2/4 channel input switch
  • 4 Gauge power/ground connectors
  • Cast aluminum heatsink
  • Top mounted controls

Product Specifications:

  • CEA-2006 Compliant:  CEA-2006 Power Rating, 100W x 4 at 4 ohms, less than 1.0 percent THD+N
  • Number of Channels:  4
  • Rated Power (RMS Continuous Power):  100 Watts x 4 at 4-Ohm, 150 Watts x 4 at 2-Ohm, 300 Watts x 2 at 4-Ohm Bridged
  • Total Power (Sum of Rated Power):  600 Watts RMS
  • Dynamic Power (PVC/PowerCube):  129 Watts x 4 at 4-Ohms 0 degrees Res, 220 Watts x 4 at 2-Ohms 0 degrees Res
  • Bridgeable:  Yes
  • Frequency Response:  20Hz to 20kHz +/-1dB
  • Efficiency (average):  80 percent at 4-Ohm, 75 percent at 2-Ohm
  • Total Harmonic Distortion (THD+Noise):  4-Ohm: less than 1.0 percent, 2-Ohm: less than 1.0 percent
  • Crossover Controls:  Front: Variable 50Hz - 500Hz at 12dB/Octave, Rear: Variable 50Hz - 500Hz at 12dB/Octave
  • Tone Controls:  0dB to +18dB at 45Hz
  • Input Sensitivity:  150 mV to 4 V
  • Signal Input:  Low Level: 2 RCA Pair
  • Signal Output:  Low Level: 1 RCA Pair
  • Power Input Connector:  Block
  • Power Wire Gauge:  4 AWG
  • Speaker Output Connector:  Block
  • Speaker Wire Gauge:  12 AWG
  • Heat Sink Type:  Cast aluminum
  • Cooling:  Convection
  • Visual Indicators:  Power, Protect
  • Circuit Topology Class:  Full Range Class-D
  • Operating Voltage:  9 - 16 VDC
  • Recommended Fuse (not included):  100 A
  • Max. Current Draw (13.8V Sinewave):  75 A
  • Average Current Draw (13.8V Music):  38 A
  • Suggested Alternator:  75 A
  • Shipping Weight:  7.038 Lbs. (3.19 Kg.)
  • Dimensions (HxWxL):  1.97" x 6.77" x 11.06", (5cm x 17.20cm x 28.10cm)
4-Channel amplifier
3mm Hex key
Installation & Operation Manual
Amplifier Verification Certificate
4 Self-tapping screws (length - 1-5/8")
This Kit Includes: