Prime 250 Watt Mono Amplifier
The PRIME R250X1 is a mono amplifier featuring a compact chassis capable of producing 250 Watts of pure Rockford Fosgate power into 2-Ohms. The frequency response of the R250X1 allows it to be used exclusively with subwoofers.
The PRIME R250X1 amplifier is great mono amplifier in a compact chassis and respectable power output in any sound system. The R250X1 mono output design also makes it great for running a pair of 8" or 10" 4-ohm SVC subwoofers wired in parallel. The included Remote Punch Level Control corrects for any acoustic anomalies in the automobile environment, making certain that bass notes sound deep and rich.
Product Features:
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost at 45Hz.
- RCA pass-thru outputs
- High level inputs
- Remote PLC (Punch Level Control)
- 0 degrees/180 degrees Phase Switch
- Real time output and power supply thermal sensing
- Cast aluminum heatsink
- 4 Gauge power/ground connectors
- MOSFET power supply
- Over current protection
- Short circuit protection
- Muted turn on
- 1 Year Standard Warranty
Product Specifications:
- CEA-2006 Compliant: CEA-2006 Power Rating, 150W x 1 at 4 ohms, less than 1.0 percent THD+N
- Number of Channels: 1
- Rated Power (RMS Continuous Power): 150 Watts x 1 at 4-Ohm, 250 Watts x 1 at 2-Ohm
- Total Power (Sum of Rated Power): 250 Watts RMS
- Dynamic Power (PVC/PowerCube): 186 Watts x 4 at 4-Ohms 0 degrees Res, 298 Watts x 4 at 2-Ohms 0 degrees Res
- Bridgeable: No
- Frequency Response: 20Hz to 250Hz +/-1dB
- Efficiency (average): 70 percent at 4-Ohm
- Total Harmonic Distortion (THD+Noise): 4-Ohm: less than 1.0 percent, 2-Ohm: less than 1.0 percent, 1-Ohm: less than 1.0 percent
- Crossover Controls: Low Pass (LP): 50Hz-250Hz at 12dB/octave Butterworth
- Tone Controls: Punch Bass: 0dB to +12dB at 45Hz
- Input Sensitivity: 150 mV to 4 V
- Signal Input: Low Level: 1 RCA pair
- Signal Output: Low Level: 1 RCA pair
- Power Input Connector: Screw terminal
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Screw terminal
- Speaker Wire Gauge: 8 AWG
- Heat Sink Type: Extruded Aluminum
- Cooling: Convection
- Remote Controls: Punch Level Control (when connected, is linked to "gain control" to provide remote output level)
- Visual Indicators: Power/Protect LED
- Circuit Topology Class: Class-A/B
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 30 A
- Max. Current Draw (13.8V Sinewave): 30 A
- Average Current Draw (13.8V Music): 15 A
- Suggested Alternator: 75 A
- Shipping Weight: 7.1 Lbs. (3.22 Kg.)
- Dimensions (HxWxL): 1.98 x 6.77 x 11.22 (in), 5 x 17.2 x 28.5 (cm)
