300 Watt 2-Channel Amplifier
The PBR300X2 is a 300 Watt amplifier with Boosted Rail Technology, allowing it to be compact and efficient while providing big power. This amp is great for smaller stealth installations, motorcycles and recreational vehicles.
The Punch PBR300X2 uses our patented BRT (Boosted Rail Technology) for an ultra efficient design that does not use a switching power supply to generate its rated power. This allows the chassis design to be much smaller than traditional sized amplifiers. The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. It is great for smaller stealth installations, as well as for motorcycles and recreational vehicles.
Product Features:
- 12dB/octave Butterworth crossover
- MOSFET output stage
- High level inputs
- Ultra compact chassis
- Variable 4-6 volt hi level DC offset voltage input turn-on control
- 1 Year Standard Warranty
- Get a 1 Year Extended Warranty
Product Specifications:
- CEA-2006 Compliant: CEA-2006 Power Rating, 100W x 2 at 4 ohms, less than or equal to 1.0 percent THD+N
- Number of Channels: 2
- Rated Power (RMS Continuous Power): 100 Watts x 2 at 4-Ohm, 150 Watts x 2 at 2-Ohm, 300 Watts x 1 at 4-Ohm Bridged
- Total Power (Sum of Rated Power): 300 Watts
- Dynamic Power (PVC/PowerCube): 114 Watts x 2 at 4-Ohm, 160 Watts x 2 at 2-Ohm, 387 Watts x 1 at 4-Ohm Bridged
- Bridgeable: Yes
- Frequency Response: 20Hz - 20kHz +/-3dB
- Efficiency (average): 68 percent at 4-Ohm
- Total Harmonic Distortion (THD+Noise): 4-Ohm: less than 1.0 percent, 2-Ohm: less than 1.0 percent
- Crossover Controls: High-Pass: 50Hz - 500Hz at 12dB/Octave Butterworth, Low-Pass: 50Hz - 500Hz at 12dB/Octave Butterworth
- All-Pass: Yes
- Tone Controls: Optional Remote Punch EQ
- Input Sensitivity: 150 mV - 11 V
- Signal Input: High/Low Level Input: 4-Pin harness
- Hi-Level Sensitivity: Variable DC offset sensitivity
- Power Input Connector: Detachable Compression Terminal
- Power Wire Gauge: 10 AWG
- Speaker Output Connector: 4-Pin Harness
- Speaker Wire Gauge: 16 AWG
- Heat Sink Type: Extruded Aluminum
- Cooling: Convection
- Remote Controls: Optional PEQ provides 0dB to +18dB at 45Hz
- Visual Indicators: Power/Protect, BRT (Boost)
- Circuit Topology Class: Class-BR
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 50 A
- Max. Current Draw (13.8V Sinewave): 45 A
- Average Current Draw (13.8V Music): 23 A
- Suggested Alternator: 75 A
- Shipping Weight: 2.8 Lbs. (1.27 Kg.)
- Dimensions (HxWxL): 1.53 x 4.25 x 6.75 (in.), 3.90 x 10.8 x 17.2 (cm)
