Single 10" 300 Watt Powered Subwoofer
The P300-10 powered subwoofer is an "all-in-one" solution when adding bass to a factory system or just to save space. This model features a 10" subwoofer in a sealed enclosure powered by an internal 300 watt amplifier.
If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-10 is the right one for the job! The P300-10 features a Punch 10" subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
Product Features:
- "Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure
- Built-in 0 degrees/180 degrees phase switch
- Separate low level and speaker level inputs
- Built-in adjustable bass boost EQ
- Adjustable 12db/Octave low pass crossover
- Detachable Power/Ground connector
- Intelligent auto turn on/off function
- Thermal and over voltage protection
- High-efficiency, low current design
- Remote bass level control included
- Proprietary high output woofer
- Constructed with 5/8" MDF
- Large AWG input terminals
- Covered with industrial heat activated vinyl
Product Specifications:
- CEA-2031 Compliant: CEA-2031 Guidelines
- CEA-2006 Compliant: CEA-2006 Guidelines
- Woofer Quantity: 1
- Woofer Size: 10"
- Woofer Series: Proprietary
- Nominal Impedance (ea): n/a
- Power Handling: 300 Watts RMS
- System Configuration: Sealed
- Enclosure Material: 5/8" MDF (Medium Density Fiberboard)
- Speaker Connector: n/a
- Frequency Response: 35Hz to 150Hz
- Integrated Amplifier: 300 Watts RMS
- Crossover Controls: Variable 50Hz to 200Hz at 12dB/Octave Butterworth
- Tone Controls: Gain and Bass Boost
- Signal Input: Low-Level: 1 RCA Pair, High-Level: Left/Right Summed Inputs
- Power Input Connector: Removable Connector Power/Ground/Remote
- Power Wire Gauge: 8 AWG
- Heat Sink Type: Extruded Aluminum
- Cooling: Convection
- Remote Control: Included
- Visual Indicators: Power, Protect
- Circuit Topology Class: Class-D
- Shipping Weight: 23.8 Lbs. (10.79 kg)
- Dimensions: 13.3 x 18 x D1 8.9 - D2 5.9 (in) 33.7 x 45.72 x D1 22.6 - D2 14.98 (cm)
