12" Two-Way Full-Range Main System/Floor Monitor
PRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.
Product Features:
- 135 dB peak SPL
- 12" Differential Drive low-frequency driver for low-distortion and higher SPL
- 1.5" diameter next generation JBL neodymium compression driver
- JBL designed waveguide for accurate coverage
- Efficient Class-D amplifier technology
- Optimized EQ for monitor or front-of-house applications
- DSP input section, crossover, dynamic limiting, component optimization, selectable system EQ
- Line level and direct microphone input capability
- Professional XLR-1/4" combination inputs, RCA inputs, and XLR loop-through
- Multi-angle enclosure for main PA or floor monitor applications
- Integrated 36 mm pole mount socket with angle down tilt
- Injection molded handle with backing cup for easy transport
- Integrated M10 suspension points for easy setup
- Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBL's tour proven DuraFlex finish.
- Cloth backed, dent-resistant 16 gauge steel grilles
Product Applications:
- PRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX718XLF subwoofer, offering a high performance self-powered sub/sat system.
- The PRX712 is comprised of a 12" Differential Drive woofer, a 2408H-1, 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver mounted to a 90 degrees by 50 degrees horn, all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable system EQ, protection, input sensitivity selection, cross-over functionality, dynamic limiting and discrete component optimization.
- All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBL's tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each.
- The amplifier input panel offers XLR or 1/4 inch jack compatibility and a sensitivity switch provides extra flexibility, making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.
Product Specifications:
- Power Rating: 1500 W
- AC Power Input: 100V - 240V 50/60 Hz
- Frequency Range (-10 dB): Main - 44.8 Hz - 19.6 kHz, Monitor - 44.8 Hz - 19.5 kHz
- Frequency Response (+/-3 dB): Main - 55.7 Hz - 18.2 kHz, Monitor - 56.5 Hz - 17.7 kHz
- Coverage Pattern: 90 degrees x 50 degrees nominal
- Directivity Index (DI): 10.2 dB
- Directivity Factor (Q): 10.4
- Crossover Frequency: 1.8 kHz
- Maximum SPL: Normal: 135 dB, Boost: 135 dB
- Signal Indicators: Limit - Yellow LED indicates peak output has been reached and dsp limiter is acting, Signal: Green LED indicates signal present, Power/Standby: Blue indicates system has power and ready to pass audio, Red indicates system has power but is in a power saving mode and will not pass audio.
- Dynamic Control (Input): dbx Type IV limiter circuit
- Input Impedance: 20K Ohms (balanced), 10K Ohms (unbalanced)
- LF Driver: 1 x JBL 272G 305mm (12 in) woofer
- HF Driver: 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm, neodymium compression driver
- Enclosure: Asymmetrical, 18 mm, plywood
- Suspension/Mounting: Dual 36 mm pole socket, 12 x M10 Suspension Points
- Transport: 1 x injection molded handles with backing cup
- Finish: Obsidian DuraFlex finish
- Grille: Powder coated, Obsidian, 16 gauge perforated steel with acoustical transparent black cloth backing.
- Input Connectors: 2 x Balanced XLR / 1/4 inch input, 2 x unbalanced RCA input
- Output Connectors: 1 male XLR balanced output
- Dimensions (H x W x D): 612.394 mm x 384.556 mm x 341.376 mm, (24.11 in x 15.14 in x 13.44 in)
- Net Weight: 19.4 kg (42.5 lb.)