400 Watt 4-Channel Amplifier
The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohm. The P400X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
The P400X4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM - you got "The PUNCH". With its flexible design, the P400X4 is an excellent amplifier choice for virtually any vehicle.
Product Features:
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost at 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- 1 Year Standard Warranty
- Get a 1 Year Extended Warranty
Product Specifications:
- CEA-2006 Compliant: CEA-2006 Power Rating, 50W x 4 at 4 ohms, less than or equal to 1.0 percent THD+N
- Number of Channels: 4
- Rated Power (RMS Continuous Power): 50 Watts x 4 at 4-Ohm, 100 Watts x 4 at 2-Ohm, 200 Watts x 2 at 4-Ohm Bridged
- Total Power (Sum of Rated Power): 400 Watts
- Dynamic Power (PVC/PowerCube): 82 Watts x 4 at 4-Ohm, 137 Watts x 4 at 2-Ohm, 266 Watts x 2 at 4-Ohm Bridged
- Bridgeable: Yes
- Frequency Response: 20Hz to 20kHz +/- 1.0dB
- Efficiency (average): 67 percent at 4-Ohm
- Total Harmonic Distortion (THD+Noise): 4-Ohm: less than 1.0 percent, 2-Ohm: less than 1.0 percent
- Crossover Controls: Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz at 12dB/octave Butterworth, Rear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz at 12dB/octave Butterworth
- All-Pass: Yes
- Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB at 45Hz and/or Front Punch EQ2 Treble: 0dB to +12dB at 12.5kHz, Rear Punch EQ2 Bass: 0dB to +18dB at 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12dB at 12.5kHz, Function depends upon LP/AP/HP switch position
- Input Sensitivity: 150 mV - 12 V
- Signal Input: Hi/Low level: 2 RCA pair
- Power Input Connector: Captive C-Clamp
- Power Wire Gauge: 8 AWG to 4 AWG
- Speaker Output Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Heat Sink Type: Cast aluminum
- Cooling: Convection
- Visual Indicators: Power/Protect/Thermal LED, Input Clip LED, Output Clip LED
- Circuit Topology Class: Class-A/B
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 60 A
- Max. Current Draw (13.8V Sinewave): 60 A
- Average Current Draw (13.8V Music): 30 A
- Suggested Alternator: 75 A
- Shipping Weight: 10.8 Lbs. (4.89 Kg.)
- Dimensions (HxWxL): 2.38 x 7.76 x 11.03 (in), 6.05 x 19.71 x 28.02 (cm)