Blowout Deals

D-Link xStack DSN-1100-10 Storage Area Network Array - 5 bay storage unit

Item # DLIDSN110010 (Part # DSN-1100-10)
xStack DSN-1100-10 Storage Area Network Array - 5 bay storage unit
x
<
>
+       -
Share
Fast Free Shipping & 45-Day Returns
Discontinued. Brand new, USA Warranty
Item Description:
The D-Link DSN-1100-10 xStack Storage 4x1GbE iSCSI SAN Array provides a smaller, more value-oriented solution for entry-level and SMB customers

overview

reviews

q&a

The D-Link DSN-1100-10 xStack Storage 4x1GbE iSCSI SAN Array provides a smaller, more value-oriented solution for entry-level and SMB customers. The heart of the DSN-1100-10 is based on the same powerful System-on-a-Chip (SoC) design found in larger arrays such as the DSN-3000 Series of products, but housed in a smaller chassis. Utilizing a 10Gbit iSCSI SoC solution that can handle over 80,000 I/Os per second, the DSN-1100-10 is capable of supporting 5TBs of raw capacity using 1TB hard drives (and even higher capacity hard drives as they are introduced). The DSN-1100-10 can easily be implemented as nearline storage or as a supplement to your primary backup and recovery device. This evolutionary advancement in performance is a testament to the tightly integrated xStack Storage architecture and is a sharp contrast to the discrete implementation of competing products.


iSCSI for IP Networks
SAN has been traditionally reserved for Fibre Channel networks until the recent introduction of iSCSI extended this powerful yet simple centralized backend storage system to IP networks. By utilizing existing Ethernet technology, the cost associated with separate host bus adapters and the per-Gigabyte cost for storage is significantly reduced. iSCSI SANs can leverage the Ethernet infrastructure and standards that are already familiar to your IT

Four 1GbE Interfaces
The DSN-1100-10 implements four 1GbE ports that support IEEE 802.3ad Link Aggregation Groups (LAG) for full offload capability. This allows all four ports to be grouped together for up to 425MB/s bandwidth, increasing throughput and redundancy.

Four 1GbE Interfaces
The DSN-1100-10 implements four 1GbE ports that support IEEE 802.3ad Link Aggregation Groups (LAG) for full offload capability. This allows all four ports to be grouped together for up to 425MB/s bandwidth, increasing throughput and redundancy.

System-on-a-Chip (SoC) Implementation
By utilizing a SoC design, the DSN-1100-10 combines both networking and storage functions into a single specialized Application Specific Integrated Circuit (ASIC). The SoC solution combines 10Gbps iSCSI, TCP & IP offload, embedded processors, and storage virtualization firmware onto a single chip. The tight integration of these functions eliminates interoperability, timing, and support issues found in competitive products that offer ?discrete implementation wherein all the various components are chosen separately and then assembled. The DSN-1100-10 outperforms these discrete implementations and does so at a lower price point, while delivering mission-critical data quickly with state-of-the-art reliability.

Features :

Specifications:

Technical Specifications
Drive Bays 5
Drive Interface Support SATA-II support
System Memory 256MB to 512MB (256MB standard)
Cache Memory 256MB to 1GB (256MB standard)
Battery Backup for Cache Standard (approximately 72 hours on full charge)
Bandwidth Up to 425MB/s
Storage Capacity 5TB capacity with 1TB hard drives (supports for higher capacity drives as they are introduced)
Supported NICs, iSCSI Accelerators and iSCSI HBAs Intel Pro 1000MT & XT [1GbE]
Intel Pro 10000 CX4 [10GbE]
Myricom 10G-PCIE-8A-C+E [10GbE]
Chelsio S310X-SR-XFP [10GbE]
Neterion Xframe II & Xframe E [10GbE]
Alacritech SES2104ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
Alacritech SES2102ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
QLogic 4010C, 4052C, & 4062C
Operating Systems Supported Windows Vista 32-bit & x64 (Ultimate & Enterprise) with Built-in iSCSI initiator
Windows Server 2003 32-bit & x64 SP1 (Standard & Enterprise) with v2.07 iSCSI initiator
Windows Server 2003 R2 32-bit & x64 (Standard & Enterprise) with v2.07 iSCSI initiator
Windows XP Pro 32-bit & x64 with v2.07 iSCSI initiator
Windows 2000 Advanced Server with v1.6 & v2.01 iSCSI initiator
Red Hat 7.3
Red Hat Enterprise AS update 5
SuSE Enterprise Server 10.2 32-bit (x86)
SuSE Professional 9.3 32-bit & x64
Mac OS X (10.4 & 10.5)
iSCSI Network Interface
iSCSI Network Interface Four 1GbE Copper Ports
Host Interface iSCSI Draft 20 compliant initiator
Connections 1,024 hosts
CHAP Authentication Yes
Access Control of Management Yes
iSCSI/TCP/IP Full HW Offload Yes
Jumbo Frames Support Yes
Link Aggregation Group Support Yes ? Up to four LAGs (IEEE802.3ad Link Aggregation Group)
VLAN Support Up to four 1-to-1 mapping between IP subnet and VLAN. Multiple VLANs per physical port with VLAN tag. All physical ports in LAG belong to same VLAN (IEEE802.1Q Tag)
Volume & RAID Support
RAID Controller Single- Integrated in ASIC
RAID Support RAID Levels 0, 1, 1+0 and 5
Volumes 1,024 Virtual Volumes (256 accessible per initiator)
Target Nodes 1,024
Online Capacity Expansion Yes
Hot Swappable Drives Yes
Instant Volume Access Yes
Free Space Defragmentation Yes
Auto-Detection Failed Drive Yes
Auto-Rebuild Spare Drive Yes
RAID Level Migration Yes
Drive Roaming in Power Off
(configured drives are not bay-specific)
Yes
Micro Rebuilds Yes
Storage Management
Embedded IP-Based Management GUI Create, manage, expand and monitor storage pool, volumes and RAID
Event manager to view and persist events
Firmware Field Upgradeable Yes
SMI-S Version 1.1 Yes
Power
Supply Type 1U 200 Watt
Input Voltage 100-240 VAC
Input Frequency 50-60Hz
Input Current 4A
Power Factor Correction 95%@110V, Full load
Power Consumption 112 Watts (full configuration)
Thermal 815 BTU/hour (full configuration)
Environmental
Operating Temperature 32 to 104F (0 to 40C)
Storage Temperature -4 to 158F (-20 to 70C)
Operating Humidity 20% ~ 90% (Non-condensing)
Storage Humidity 10% ~ 95% (Non-condensing)
Physical (approximate)
Form Factor Tower
Dimesnsions (D x W x H) 10.7in x 6.6in x 10.2in (273mm x 167mm x 259mm)
Weight with No Drives Installed 8.8 lbs (4.0 kg)
International Approvals
Emissions CE Class A, FCC Class A, C-Tick Class A, VCCI Class A
Safety CSA 60950-1, UL60950-1, IEC 60950-1, EN 60950-1
Warranty and Support
Warranty 2-Year Limited*
Extended Warranty Available
Support 1 year, 9 hours per day / 5 days per week Technical Support
Available Configurations
DSN-1100-10 xStack Storage 4X1GbE iSCSI SAN Array with 5 SATA Bays
Amazon Payments Visa Checkout is accepted Mobile Website
Why buy from buydig?