Blowout Deals
‹ Back

D-Link 8x1GbE iSCSI SAN Array, 3U - 15 bay storage unit with 8 GbE interfaces

Item # DLIDSN320010 (Part # DSN-3200-10)
Fast Free Shipping & 45-Day Returns
Discontinued Brand new, USA Warranty
Item Description:
Integrated iSCSI System-on-a-Chip (SoC) Solution that can Handle over 80,000 I/Os per Second, Eight 1GbE Ports, 15TB Capacity with 1TB Hard Drives




The D-Link xStack Storage Area Network (SAN) Array DSN-3200-20 is designed to provide a reliable network data storage solution for customers in entry-level and SMB segments. Utilizing a 10Gbit iSCSI System-on-a-Chip (SoC) solution that can handle over 80,000 I/Os per second and capable of supporting 15TB raw capacity using 1TB hard drives (and even higher capacity hard drives as they are introduced), the DSN-3200-20 Array can easily be implemented as nearline storage to supplement your primary IP network storage solution or be used as a basic backup and recovery device. This evolutionary advancement in performance is a testament to the tightly integrated xStack Storage architecture and is a sharp contrast to the discrete implementation of competing products.

iSCSI for IP Networks
SAN has been traditionally reserved for Fibre Channel networks until the recent introduction of iSCSI that extends this powerful yet simple centralized backend (behind server-based) storage system to IP networks. By utilizing existing Ethernet technology, the cost associated with separate host bus adapters and the per-Gigabyte cost for storage is significantly reduced.

High Performance iSCSI Interface
The DSN-3200-20 implements eight 1GbE ports and supports IEEE 802.3ad Link Aggregation Groups (LAG) for full offload capability so that all eight ports can be grouped together, totaling up to 850MB/s bandwidth, for increased throughput and redundancy.

Features :


Drive Bays 15
Drive Interface Support SATA-II support
System Memory 256MB to 512MB (512MB standard)
Cache Memory 256MB to 4GB (512MB standard)
Battery Backup for Cache Standard (approximately 72 hours on full charge)
Bandwidth Up to 850Mbytes per second
Storage Capacity 15TB capacity with 1TB hard drives (supports higher capacity drives as they are introduced)
Operating Systems Supported Windows Vista 32-bit & x64 (Ultimate & Enterprise) w/Built-in iSCSI initiator
Windows Server 2003 32-bit & x64 SP1 (Standard & Enterprise) w/v2.04 iSCSI initiator
Windows Server 2003 R2 32-bit & x64 (Standard & Enterprise) w/v2.04 iSCSI initiator
Windows XP Pro 32-bit & x64 w/v2.04 iSCSI initiator
Windows 2000 Advanced Server w/v1.6 & v2.01 iSCSI initiator
Fedora Core 6 & 7
Red Hat 7.3
Red Hat 9
Red Hat Enterprise WS 3 update 4
Red Hat Enterprise ES 4 update 4 & 5 32-bit & x64
Red Hat Enterprise AS update 4
SuSE Professional 9.3 32-bit & x64
Apple OS X (10.4.7 | 10.4.8 | 10.4.10) w/Intel and Power PC CPUs
Supported NICs, iSCSI Accelerators and iSCSI HBAs Intel Pro 1000MT & XT [1GbE]
Intel Pro 10000 CX4 [10GbE]
Chelsio S210X-SR-XFP (S2iO) [10GbE]
Neterion Xframe II & Xframe E [10GbE]
Alacritech SES2104ET (drivers: SNP &
Alacritech SES2102ET (drivers: SNP &
QLogic 4010C
QLogic 4052C
iSCSI Network Interface
iSCSI Network Interface Eight (8) 1GbE Copper
Host Interface iSCSI Draft 20 compliant initiator
Connections 1,024 hosts
CHAP Authentication Yes
Access Control of Management Yes
iSCSI/TCP/IP Full HW Offload Yes
Jumbo Frames Support Yes
LAG Support (Link Aggregation) Yes - Up to eight (8) LAGs
VLAN Support Up to eight (8). 1-to-1 mapping between IP subnet and VLAN. Multiple VLANs per physical port with VLAN tag. All physical ports in LAG belong to same VLAN
Volume & RAID Support
RAID Controller Single- Integrated in ASIC
RAID Support RAID Levels 0, 1, 1+0 and 5
(Striped sets, mirrored sets, striped mirrored sets and parity sets)
Volumes 1,024 Virtual Volumes (256 accessible per initiator)
Target Nodes 1,024
Online Capacity Expansion Yes
Hot Swappable Drives Yes
Instant Volume Access Yes
Free Space Defragmentation Yes
Auto-Detection Failed Drive Yes
Auto-Rebuild Spare Drive Yes
RAID Level Migration Yes
Drive Roaming in Power Off
(configured drives are not bay-specific)
Micro Rebuilds Yes
Storage Management
Embedded IP-Based Management GUI -Create, manage, expand and monitor storage pool, volumes and RAID
-Event manager to view and persist events
Firmware Field Upgradeable Yes
SMI-S Version 1.1 Yes
Supply Type Redundant 3U 2+1 760 Watt
Input Voltage 90-264 VAC (auto-switching)
Input Frequency 47-63 Hz
Input Current 20A Maximum at 90VAC and 10A Maximum at 264VAC
(maximum amps vs. voltage varies linearly throughout this voltage range)
Power Factor Correction 95%@110V, Full load
Power Consumption 570W (full configuration)
Thermal 2000 BTU / hour (full configuration)
Operating Temperature 32 to 104 degrees F / 0 to 40 degrees C
Storage Temperature -4 to 158 degrees F / -20 to 70 degrees C
Operating Humidity 20 to 90% non-condensing
Storage Humidity 10 to 95% non-condensing
Physical (approximate)
Form Factor 3U industry-standard 19-inch rack
Height 5.2 inches / 13.3 centimeters
Width 17.25 inches / 43.8 centimeters
Depth 22.5 inches / 57.1 centimeters
Weight 73 pounds / 33 kilograms (full configuration)
International Approvals
Emissions CE Class A, FCC Class A, C-Tick Class A, VCCI Class A
Safety CSA 60950-1, UL60950-1, IEC 60950-1, EN 60950-1
Warranty and Support
Warranty 2 Years on DSN-3200 (manufacturers warranty on hard drives)
Extended Warranty Available
Support 1 year 9 hours per day / 5 days per week Technical Support
Available Configurations
DSN-3200-10 xStack 8x1GbE iSCSI SAN Array, 15 Bays, 3U, w/o Drives, with Trays
DSN-3200-20 xStack 8x1GbE iSCSI SAN Array, 15 Bays, 3U, w/o Drives, w/o Trays
DSN-3400-10 xStack 1x10GbE iSCSI SAN Array, 15 Bays, 3U, w/o Drives, with Trays
DSN-3400-20 xStack 1x10GbE iSCSI SAN Array, 15 Bays, 3U, w/o Drives, w/o Trays
Available Accessories
DSN-111-400 400GB SATA-2 Hard Disk Drive + Hot Swap Tray
DSN-111-500 500GB SATA-2 Hard Disk Drive + Hot Swap Tray
DSN-111-750 750GB SATA-2 Hard Disk Drive + Hot Swap Tray
Amazon Payments Visa Checkout is accepted Mobile Website
Why buy from buydig?