Dear Customers. We will be closed April 23rd and 24th in observance of Passover. Orders placed during that time will begin processing on the 25th. Thank you for your patience.

Rockford Fosgate Prime 300 Watt 4-Channel Amplifier (R300x4)

Item # RFFSR3004 (Part # R300-4)
Discontinued
Brand new, USA Warranty
and choose One-Day Shipping at checkout.
Item Description:
The PRIME R300X4 is a versatile 4-channel amplifier capable of running your entire system. The R300X4 is great for full-range or component speakers on the front channels with subwoofers on the rear running in bridged/mono mode.

Rockford Fosgate amplification at an unbelievable value. The R300X4 4-channel amplifier is so versatile, it will be the only amplifier your system needs. Full-range or component speakers on the front channels and a single R1S410 10" or R1S412 12" woofer bridged/mono on the rear. Consider your system clean, loud and done!. Check out our RFTECH:Woofer WiringWizard to get the most out of your amplifier.

Product Details:

  • 12dB/octave Butterworth crossover
  • 0/6/12 dB On Board Punch EQ Control
  • 2/4 channel switch
  • High Level Input (4-pin)
  • Separate Front and Rear Gain Control
  • Real time output and power supply thermal sensing
  • Cast aluminum heatsink
  • 4 Gauge power/ground connectors
  • MOSFET power supply
  • Over current protection
  • Short circuit protection
  • Muted turn on
  • 1 Year Standard Warranty

Product Specifications:

Number of Channels: 4
Rated Power (RMS Continuous Power): 50 Watts x 4 @ 4-Ohm, 75 Watts x 4 @ 2-Ohm, 150 Watts x 2 @ 4-Ohm Bridged
Total Power (Sum of Rated Power): 300 Watts RMS
Dynamic Power (PVC/PowerCube Measurement): Front Channels: TBA Watts x 2 @ 4-Ohms 0? Res, TBA Watts x 2 @ 2-Ohms 0? Res
Front Channels: TBA Watts x 2 @ 4-Ohms 0? Res, TBA Watts x 2 @ 2-Ohms 0? Res
Bridgeable: Yes
Efficiency (average): TBA% @ 4-Ohm, TBA% @ 2-Ohm
Crossover Controls: Front Channels
High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth
Rear Channels
High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth
Tone Controls: Front Channels
Punch Bass: 0dB/+6dB/+12dB @ 45Hz
Rear Channels
Punch Bass: 0dB/+6dB/+12dB @ 45Hz
Function works when crossover in (LP) position
Signal Input: Low Level: 2 RCA pair
Signal Output: n/a
Power Input Connector: Screw terminal
Power Wire Gauge: 4 AWG
Speaker Output Connector: Screw terminal
Speaker Wire Gauge: 8 AWG
Heat Sink Type: Extruded Aluminum
Cooling: Convection
Visual Indicators: Power/Protect LED
Circuit Topology Class: Class-A/B
Frequency Response: 20Hz to 20kHz +/-1dB
Shipping Weight: TBA Lbs.
Dimensions (HxWxL): 1.98 x 6.77 x 13.19 (in), 5 x 17.2 x 33.5 (cm)

Four-channel amplifier with two 25-amp fuses installed in chassis
2 Additional 25-amp fuses
4 Mounting screws
4 Flat washers
Installation/Operation Manual (Eng/Spa/Fre)
Amplifier Verification Certificate
This Kit Includes: