300 Watt Full-Range Mono Amplifier
The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.
The P300X1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.
Product Features:
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost at 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- 1 Year Standard Warranty
- Get a 1 Year Extended Warranty
Product Specifications:
- CEA-2006 Compliant: CEA-2006 Power Rating, 200W x 1 at 4 ohms, less than or equal to 1.0 percent THD+N
- Number of Channels: 1
- Rated Power (RMS Continuous Power): 200 Watts x 1 at 4-Ohm, 300 Watts x 1 at 2-Ohm
- Total Power (Sum of Rated Power): 300 Watts
- Dynamic Power (PVC/PowerCube): 260 Watts x 1 at 4-Ohms 0 degrees Res, 444 Watts x 1 at 2-Ohms 0 degrees Res
- Bridgeable: No
- Frequency Response: 20Hz to 20kHz +/- 1.0dB
- Efficiency (average): 74 percent at 4-Ohm
- Total Harmonic Distortion (THD+Noise): 4-Ohm: less than 1.0 percent, 2-Ohm: less than 1.0 percent
- Crossover Controls: High-Pass: 50Hz-250Hz at 12dB/octave Butterworth, Low-Pass: 50Hz-250Hz at 12dB/octave Butterworth
All-Pass: Yes - Tone Controls: Punch EQ2 Bass: 0dB to +18dB at 45Hz and/or Punch EQ2 Treble: 0dB to +12.5dB at 12kHz, Function depends upon LP/AP/HP switch position
- Input Sensitivity: 150 mV - 12 V
- Signal Input: Hi/Low level: 1 RCA pair
- Signal Output: Low Level: 1 RCA Pair
- Power Input Connector: Captive C-Clamp
- Power Wire Gauge: 8 AWG to 4 AWG
- Speaker Output Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Heat Sink Type: Cast aluminum
- Cooling: Convection
- Remote Controls: Optional Punch Level Control (PLC2) Ready
- Visual Indicators: Power/Protect/Thermal LED, Input Clip LED, Output Clip LED
- Circuit Topology Class: Class-A/B
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 50 A
- Max. Current Draw (13.8V Sinewave): 45 A
- Average Current Draw (13.8V Music): 23 A
- Suggested Alternator: 75 A
- Shipping Weight: 9.5 Lbs. (4.30 Kg.)
- Dimensions (HxWxL): 2.38 x 7.76 x 9.86 (in), 6.05 x 19.71 x 25.04 (cm)