500 Watt Class-bd Mono Amplifier
The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response allows it to be optimized for subwoofers.
With its super efficient Class-bd circuit topology, the P500X1bd will drop some serious BASS! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
Product Features:
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- RCA pass-thru outputs
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost at 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Infrasonic filter
- 1 Year Standard Warranty
- Get a 1 Year Extended Warranty
Product Specifications:
- CEA-2006 Compliant: CEA-2006 Power Rating, 150W x 1 at 4 ohms, less than or equal to 1.0 percent THD+N
- Number of Channels: 1
- Rated Power (RMS Continuous Power): 150 Watts x 1 at 4-Ohm, 300 Watts x 1 at 2-Ohm, 500 Watts x 1 at 1-Ohm
- Total Power (Sum of Rated Power): 500 Watts
- Dynamic Power (PVC/PowerCube): 224 Watts x 1 at 4-Ohm, 410 Watts x 1 at 2-Ohm, 787 Watts x 1 at 1-Ohm
- Bridgeable: No
- Frequency Response: 20Hz to 250Hz +/- 1.0dB
- Efficiency (average): 86 percent at 4-Ohm
- Total Harmonic Distortion (THD+Noise): 4-Ohm: less than 1.0 percent, 2-Ohm: less than 1.0 percent, 1-Ohm: less than 1.0 percent
- Crossover Controls: Low-Pass (LP): 50-250Hz at 12dB/octave Butterworth, Infrasonic Filter (IF): 28Hz at 12dB/Octave
- All-Pass (AP): No
- Tone Controls: Punch EQ2 Bass: 0dB to +18dB at 45Hz
- Input Sensitivity: 150 mV - 12 V
- Signal Input: Hi/Low level: 1 RCA pair
- Signal Output: Low level: 1 RCA pair
- Power Input Connector: Captive C-Clamp
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Heat Sink Type: Cast aluminum
- Cooling: Convection
- Remote Controls: Optional Punch Level Control (PLC2) Ready
- Visual Indicators: Power/Protect/Thermal LED, Input Clip LED, Output Clip LED
- Circuit Topology Class: Class-BD
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 80 A
- Max. Current Draw (13.8V Sinewave): 70 A
- Average Current Draw (13.8V Music): 35 A
- Suggested Alternator: 75 A
- Shipping Weight: 10.8 Lbs. (4.89 Kg.)
- Dimensions (HxWxL): 2.38 x 7.76 x 11.03 (in), 6.05 x 19.71 x 28.02 (cm)
