Visit Our Certified Refurbished Outlet. Premium Brands. Like-New Products. Unbeatable Savings. Shop Now!

CAD Audio C195 Cardioid Condenser Microphone (no switch) - with 15' XLR-M to XLR-F Cable

Item # CADC195 (Part # C195)
Not Available
Brand new, USA Warranty
and choose One-Day Shipping at checkout.
Item Description:
  • Operating Principle: Condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 55Hz to 20KHz
  • Sensitivity: -35dBV (18mV) @ 1 Pa
  • Impedance: 500 ohms
  • CAD C195 Condenser Cardioid Microphone
    Designed for professional vocalists and musicians
    The cardioid pickup pattern minimizes annoying feedback (when used close to sound reinforcement speakers and monitors) and reduces the pickup of unwanted off-axis sounds. A transformerless electronic design provides optimum low frequency response and low distortion. An effective internal multistage pop filter minimizes wind and breath noise.

    The CAD C195 provides the performance and features to satisfy today's most demanding professionals.
    The low-frequency response of the CAD C195 may be enhanced by increasing or decreasing the distance from the sound source. This phenomenon is technically known as 'proximity effect'. Nominal or 'flat' response is generated at a distance of 24 inches or more. However, as the distance to the sound source decreases, the bass sensitivity increases, providing a solid, robust character.

    The CAD C195 features the CAD exclusive (I.N.R.-3) Impact Noise Rejection system
    Our proprietary rubber shock mount isolates the transducer from the barrel, thus dramatically reducing cable, stand and handling noise. The need for any external shock mounting device is virtually eliminated.

    Technical Specifications

    Generating Element - Electret condenser (Phantom Powered)
    Polar Pattern - Unidirectional (Cardioid)
    Frequency Response - 50 Hz - 18 kHz
    Output Level - Open Circuit
    Voltage - -55 dB (0 dB = 1 volt per microbar)
    Impedance @ 1 kHz - 500 ohms
    Dynamic Range - 110 dB
    Equivalent Noise Level - Less than 22 dB, A weighted
    Maximum SPL - 132 dB (1% THD, open circuit)

    Powering
    Supply Voltage - 9 - 52 Vdc, positive pins 2 & 3 reverse polarity protected
    Current Required - Less than 5 mA over operating voltage range
    Phasing - Positive pressure on diaphragm generates a positive voltage on pin 2 relative to pin 3

    Grille Screen - Hardened Steel Mesh
    Case - Steel and die cast zinc alloy
    Finish - Durable soft feel, non-slip, titanium gray body, midnight black screen

    C195 Microphone
    Vinyl Pouch
    Microphone Swivel Mount
    Authorized Dealer - Full USA Warranty
    This Kit Includes: