Product Specifications And Features:
Wheeler's Deluxe 89 Piece Gunsmithing Screwdriver Set is the kit that belongs on every gunsmithing bench as screwdrivers are known to be the most important and most-used gunsmithing tools. The well thought-out bit selection will put an end to burred, buggered, busted up screw slots on any gun that comes your way and will keep your gun looking and operating as good as new. This of course will allow you to prevent costly damage that ruins the look, function, and value of your guns. The bits make up the heart of any screwdriver set, and Wheeler's are the finest available. They're made from S2 tool steel and hardened to 56-58 Rockwell "C." Unlike other screwdriver suppliers, Wheeler's engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation. As shown, these will come in a durable custom tool box that's ready for the bench or your range kit:
- There's a bit to fit every screw on your gun whether you're working on a Browning Superposed, a Remington 700, a Smith & Wesson revolver, or even a Colt Single Action, you'll find that this kit has a bit to fit every screw on your gun.
- 15 ingenious "specialty bits" are included that are great for installing scope bases, getting you out of a pinch by providing a small pin punch when you really need it, and keeping once-in-a-while lifesaver tools at your fingertips.
- The 54 Hollow-ground flat bits range in size from .120"x.020" to .360"x.070", and includes doubles in the thinnest sizes. (Any gunsmith will tell you that you're occasionally going to break the ultra-thin bits on stubborn screws. This set includes two each of the very thinnest bits, which means you'll never be stuck in the middle of a job without the proper bit. Replacement bits are available in three packs for a very modest price.)
- Technical Information
-Hinged storage box
-3" shaft extension
-Hex to square drive adapter (allows using the bits with a 1/4 drive socket wrench - wrench is not included)
-54 flat bits
-8 Allen bits, sizes ranging from 1/16" to 3/16"
-4 Phillips bits, #0, #1, #2, #3
-3 Torx bits, T10, T15, T20
Note: includes two each of the very thinnest bits in this set, this is intentional as the thinnest are most likely to break
- Included 15 specialty bits:
-Weaver/Ruger scope ring clamp bit
-Redfield windage screw bit
-Leupold windage screw bit
-Mauser stock cross bolt bit
-Millett rear sight adjustment bit
-1911 grip screw bushing driver
-Ruger/Colt single action base pin latch nut bit
-M1/M14/M1A rear sight bit
-.062" pin punch
-.093" pin punch
-.118" pin punch
-Remington 870/1100/1187 trigger plate pin punch
-2" #2 Phillips
-Glock replacement front sight screw bit
-S&W rebound spring compressor tool
- Note on bits:
The bits in these sets are designed to break before damaging the fastener itself. Breakage of a bit should not be considered a defect, rather it means that the fastener will require some other means of removal or an application of a suitable compound that will penetrate threads, such as Kano Kroil.
Case Size: 8"x12"x3"
Bit Material: S2 Tool Steel
Bit Hardness: 56-58 Rockwell C
Driver Handles: 2, with magnets
Extension: 1, 3" with magnet
Adapter: 1 Hex to square drive
Flat Bits: 54 Hollow-Ground
Allen Bits: 8
Phillips Bits: 4
Torx Bits: 3
Specialty Bits: 15
Gunsmiths around the world require tools that offer reliability and innovation, while providing years of dependable service. Wheeler Engineering tools are of the highest quality and most are priced below similar products, which makes them affordable for both professional gunsmiths and home do-it-yourselfers. Designed with the utmost care and meticulous attention to detail by seasoned professionals, Wheeler Engineering products guarantee high efficiency and value you've been looking for. Their workmanship is guaranteed for life. Their dependability is ensured by the use of top-grade materials. So, when it comes safety and functionality, you can trust Wheeler Engineering.