600 Watt 4-Channel Amplifier
The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.
Product Features:
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost at 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- 1 Year Standard Warranty
- Get a 1 Year Extended Warranty
Product Specifications:
- CEA-2006 Compliant: CEA-2006 Power Rating, 75W x 4 at 4 ohms, less than or equal to 1.0 percent THD+N
- Number of Channels: 4
- Rated Power (RMS Continuous Power): 75 Watts x 4 at 4-Ohm, 150 Watts x 4 at 2-Ohm, 300 Watts x 2 at 4-Ohm Bridged
- Total Power (Sum of Rated Power): 600 Watts
- Dynamic Power (PVC/PowerCube): 129 Watts x 4 at 4-Ohms 0 degrees Res, 211 Watts x 4 at 2-Ohms 0 degrees Res
- Bridgeable: Yes
- Frequency Response: 20Hz to 20kHz +/- 1.0dB
- Efficiency (average): 68 percent at 4-Ohm
- Total Harmonic Distortion (THD+Noise): 4-Ohm: less than 1.0 percent, 2-Ohm: less than 1.0 percent
- Crossover Controls: Front/Rear High-Pass (HP): 50Hz-250Hz at 12dB/octave Butterworth, Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth
- All-Pass: Yes
- Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB at 45Hz and/or Front Punch EQ2 Treble: 0dB to +12.5dB at 12kHz, Rear Punch EQ2 Bass: 0dB to +18dB at 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12.5dB at 12kHz, Function depends upon LP/AP/HP switch position
- Input Sensitivity: 150 mV - 12 V
- Signal Input: Hi/Low level: 2 RCA pair
- Signal Output: Low level: 1 RCA pair
- Power Input Connector: Captive C-Clamp
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Heat Sink Type: Cast aluminum
- Cooling: Convection
- Remote Controls: Optional Punch Level Control (PLC2) Ready
- Visual Indicators: Power/Protect/Thermal LED, Power/Protect/Thermal LED, Input Clip LED
- Circuit Topology Class: Class-A/B
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 100 A
- Max. Current Draw (13.8V Sinewave): 90 A
- Average Current Draw (13.8V Music): 45 A
- Suggested Alternator: 75 A
- Shipping Weight: 12.8 Lbs. (5.80 Kg.)
- Dimensions (HxWxL): 2.38 x 7.76 x 13.28 (in), 6.05 x 19.71 x 33.73 (cm)