Prime 150 Watt 2-Channel Amplifier
The PRIME R150X2 is a 2-channel amplifier that can pump-out 75 Watts into both channels at 2-Ohms, making it perfect for full-range or component speakers. The R150X2 can also run in bridged/mono mode for use with subwoofers.
Rockford Fosgate amplification at an unbelievable value. The R150X2 2-channel amplifier pumps out more than enough to power a set full-range or component speakers, or you can bridge it into a 4-ohm load to produce 150 watts for a single R1S410 10" or R1S412 12" woofer. Check out our RFTECH:Woofer WiringWizard to get the most out of your amplifier.
Product Features:
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost at 45Hz.
- RCA pass-thru outputs
- High Level Input (4-pin)
- Real time output and power supply thermal sensing
- Cast aluminum heatsink
- 4 Gauge power/ground connectors
- MOSFET power supply
- Over current protection
- Short circuit protection
- Muted turn on
- 1 Year Standard Warranty
Product Specifications:
- CEA-2006 Compliant: CEA-2006 Power Rating, 50W x 2 at 4 ohms, equal to or less than 1.0 percent THD+N
- Number of Channels: 2
- Rated Power (RMS Continuous Power): 50 Watts x 2 at 4-Ohm, 75 Watts x 2 at 2-Ohm, 150 Watts x 1 at 4-Ohm Bridged
- Total Power (Sum of Rated Power): 150 Watts RMS
- Dynamic Power (PVC/PowerCube): 61 Watts x 2 at 4-Ohms 0 degrees Res, 94 Watts x 2 at 2-Ohms 0 degrees Res
- Bridgeable: Yes
- Frequency Response: 20Hz to 20kHz +/-1dB
- Efficiency (average): 66 percent at 4-Ohm
- Total Harmonic Distortion (THD+Noise): 4-Ohm: less than 1.0 percent, 2-Ohm: less than 1.0 percent
- Crossover Controls: High-Pass/Low-Pass (HP/LP): 50-250Hz at 12dB/octave Butterworth
- Tone Controls: Punch Bass: 0dB to +12dB at 45Hz
- Input Sensitivity: 150 mV to 4 V
- Signal Input: Low Level: 1 RCA pair
- Signal Output: Low Level: 1 RCA pair
- Power Input Connector: Screw terminal
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Screw terminal
- Speaker Wire Gauge: 8 AWG
- Heat Sink Type: Extruded Aluminum
- Cooling: Convection
- Visual Indicators: Power/Protect LED
- Circuit Topology Class: Class-A/B
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 20 A
- Max. Current Draw (13.8V Sinewave): 20 A
- Average Current Draw (13.8V Music): 10 A
- Suggested Alternator: 75 A
- Shipping Weight: 6.6 Lbs. (2.99 Kg.)
- Dimensions (HxWxL): 1.98 x 6.77 x 11.22 (in), 5 x 17.2 x 28.5 (cm)
