Experience cutting-edge printing with instax mini Link 2!
Draw in the air with instax AiR!
Direct the LED light on the side of the printer at your smartphone and move the printer around in the air to write or draw and let your creativity flow!
Add an effect to create your own special print.
Print Mode
Simple Print
Easy & Continuous High-Speed Printing
Use the free downloadable instax mini Link App to easily print multiple images right from your Smartphone in only 15 seconds (film development time approximately 90 seconds)! You can even print your favorite still from a video!
Use the built-in motion control feature on the mini Link 2 to take photos on your smartphone, remotely.
Tilt the printer to zoom in or out!
You can also snap a picture by pressing the power button.
Fun Mode
1. Draw whatever you like in the AiR then print! Press & hold the feature button on the printer. Once the printer vibrates you can start drawing. Move the printer around in the air and let your creativity flow!
2. You can also draw with your finger in the App.
3. Take a video of you drawing in the AiR then share it as a QR code on your print!
Match Test
Test your compatibility with friends and watch the results appear on your print!
Frame Print
Choose fun frame designs to add to your photo.
Sketch, edit & print
Import and add your sketches or text to your photo, then print!
Collage Print
Give your prints a more stylish look and combine all your favorite photos together!
Enhanced Quality Photos
Choose the new "instax-Rich Mode" for richer colors or "instax-Natural Mode" to print the natural colors of the photo.
Print images shot with a digital camera on the spot!
The FUJIFILM X-S10 can send your photos directly to the instax mini Link 2 Smartphone Printer.
Product Specifications:
Recording method
3-color exposure with OLED
Film used
FUJIFILM INSTAX Mini Instant Film (sold separately)
Image size
2.4 in x 1.8 in / 62 mm x 46 mm
Exposure pixel count
800 x 600 dots
Exposure resolution
12.5 dots/mm (318 dpi, 80 μm dot pitch)
Exposure gradation
RGB gradation of 256 colors
Interface
Bluetooth Ver. 4.2 (BLE)
Printable image format
JPEG, PNG, HEIF, DNG
Printing time
Image recording - photo output (fed out):
Approximately 15 sec.
Possible number of printed images
Approximately 100 (from full charge; number of prints depends on usage conditions)
Power supply
Lithium ion battery (internal type: not removable)
Charging time
Approximately 80 to 120 minutes (depending upon environment temperature at time of charging)
Power consumption
Approximately 3 W
Operating environment
Temperature: +41 degF to +104 degF (+5 degC to +40 degC )
Humidity: 20% to 80% (no condensation)
Main unit dimensions
3.6 in x 1.4 in x 4.9 in / 91.9 mm x 36.4 mm x 124.8 mm (excluding projecting parts)
Main unit mass
Approximately 0.46 lbs / 210 g (excluding film pack)
Supplied accessory
Micro USB cable ( BOD700-200, Length: 11.8 in / 30 cm )
Footnotes:
Images of instax printing are for illustrative purposes only.
After an image is shot, it takes a short amount of time to display on the screen.
The above specifications are subject to change for performance improvement.
Image size may affect print finish (sharpness, grain, etc.).
Time required for wireless communication may be affected by file size, smartphone model, etc.
Print finish (color, image quality, etc.) may be affected by smartphone model, shooting conditions, etc.
Actual print finish may differ from the image displayed on the LCD screen of your smartphone.
Smartphone screen images are superimposed.
The Bluetooth word mark and logo are registered trademarks of Bluetooth SIG, Inc. and FUJIFILM Corporation uses these under license.
QR code is a registered trademark of DENSO WAVE INCORPORATED.
