The Control 29AV-1 provides improved voicing for extremely flat, high-fidelity performance, extended bandwidth and well-controlled defined coverage from a
compact loudspeaker. The rotatable high-frequency horn allows use of the speaker in either vertical or horizontal orientation. Consistent coverage ensures excellent sound character throughout the listening area. Moderate magnetic shielding allows use of the speaker as close as 230 mm (9) to video monitors.
Extended bandwidth, extremely smooth frequency response
110° x 85° HF coverage, rotatable horn
110-Watt transformer for 70 V or 100 V lines, with 8 ohm thru.
Includes InvisiBall mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket
The top-quality line distribution transformer, designed for minimal insertion loss and reduced saturation, allows use of either 70V or 100V distributed speaker lines. In bypass position, the 8Ω impedance allows use of multiple speakers on a loudspeaker line.
The included InvisiBall mounting method is simple to install, aims easily and provides a high degree of theft deterrence. InvisiBall allows horizontal rotation of up to 41° off-axis and vertical rotation of up to 36° (horn end inward) or 23° (woofer end inward). Attachment points for the optional MTC-29UB U-bracket allows for compact installation.
Weather resistance has been maximized. The woofer’s cone is made of kevlar, surround is pure butyl rubber, and the driver basket is rear loaded to minimize direct exposure. The compression driver’s diaphragm is pure titanium. The grille is thermoset composite coated and comes with foam to minimize incursion of water. Nickel/zinc rust-resistant terminals ensure a secure input connection. An MTC-PC2 sealed-entrance cover is included to further protect the speaker’s terminals.
JBL’s exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full-fidelity sound.
Frequency Range - (-10 dB)1 37 Hz –18 kHz
Frequency Response - (± 3 dB)1 43 Hz – 15 kHz
100 Hr Power Capacity - 300 Watts Continuous Program Power
150 Watts Continuous Pink Noise
Maximum SPL - @ 1m3 Short-Term: 118 dB; Long-Term: 112 dB
Nominal Sensitivity - 90 dB, 1W @ 1 m (3.3 ft)
Nominal Coverage Angle - 110° H x 85° V, rotatable
Directivity Factor - (Q) 6.7, averaged 500 Hz to 16 kHz
Directivity Index - (DI) 8.3 dB, averaged 500 Hz to 16 kHz
Nominal Impedance - 8 ohms
Minimum Impedance - 6.3 ohms @ 230 Hz 3.3 ohms @ 4.1 kHz
Crossover Type - 3rd order high-pass, 2nd order low-pass with impedance compensation, 2.5 kHz crossover frequency
Transformer Taps - 70V: 110W, 55W, 28W & 14W
100V: 110W, 55W, & 28W
Thru Position: 8Ω nominal
Low Frequency - 200 mm (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
High Frequency - 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
Enclosure Material - High impact polystyrene
Grille - Thermoset composite coated steel
Overload Protection - Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during extreme overload conditions.
Environmental - IEC 529 IP-X4 splashproof rating. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
Termination - Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
Safety Agency - Rating Transformer is listed per UL1876
Colors - Black
Dimensions (H x W x D) - 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in)
Net Weight (each) - 12.2 kg (26.8 lb)
Shipping Weight (each) - 14.0 kg (30.8 lb)
Included Accessories - 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench