Consistent Coverage Extended Bass
The Control 47C/T features extended bass performance with a wide 120° of coverage that allows fewer speakers to cover a large space. Ideal for a wide variety of applications, the Control 47C/T is perfect for settings ranging from restaurant and retail to large casinos and beyond.
Product Highlights:
Extremely consistent 120 degree broadband pattern control
Wide coverage requires fewer speakers, reducing the cost of the installed system
8 ohm and 70V/100V operation
Integrated backcan for easy “blind-mount” install
Product Features:
Radiation Boundary Integrator (RBI)
JBL's RBI technology provides a large waveguide for the tweeter while low-frequency sound projects through specially-designed apertures in the RBI, allowing for a seamless integration of coverage between the two coaxially mounted drivers. The result is extremely consistent sound character with very little variation throughout the listening space. The wide coverage allows for the use of fewer loudspeakers compared to speakers with less consistent coverage control, while at the same time providing better coverage of the area.
Powerful Sound
The large backcan on the Control 47C/T, along with the LF driver design, provides extended bass response for a warm full-bodied tone. The system’s 165 mm (6.5 in) woofer features a polypropylene cone and pure butyl rubber surround for long life. The copper-clad aluminum voice coil wound on a vented aluminum former provides low distortion and high sensitivity. The coaxially mounted 25 mm (1 in) soft dome features internal damping for smooth extended response and ferrofluid cooling for enhanced power handling and reduced power compression. The result is crisp, clear highs.
Diverse Applications
Ideal for small and large projects alike, the Control 47C/T is switchable for use as either an 8-ohm low-impedance speaker, or as part of a 70V/100V distributed loudspeaker system.
Product Specifications:
System
Frequency Range (-10 dB) - 55 Hz – 20 kHz
Frequency Response (± 3 dB) - 75 Hz – 17 kHz
Power Capacity - 150W Continuous Program Power
75W Continuous Pink Noise
Nominal Sensitivity - 91 dB
Nominal Coverage Angle - 120° conical coverage
Directivity Factor (Q) - 6.5
Directivity Index (DI) - 7.9 dB
Rated Maximum SPL - 110 dB @ 1 m (3.3 ft) average, 116 dB peak
Rated Impedance - 8 ohms (in bypass mode)
Transformer Taps - 60W, 30W, 15W, (& 7.5W @ 70 V)
Transformer Insertion Loss - 0.76 dB @ 60W, 0.70 dB @ 30W, 0.61 dB @ 15W, 0.58 dB @ 7.5W
Transducers
LF Driver - 165 mm (6.5 in) with polypropylene cone, butyl rubber surround, copper-clad coil, vented aluminum former
HF Driver - 25 mm (1 in) soft dome w/ dampening, ferrofluidcooled
Enclosure
Input Connectors - Two removable locking 2-pin connectors with screwdown terminals; max wire size 12 AWG (2.5 mm)
Knockouts - Two (top and side)
Safety Agency - Suitable for use in air handling spaces per UL1480, UL2043, NFPA90 & NFPA 70; S7232/UL listed, signaling speaker; transformer UL registered per UL1876; in accordance with IEC60849/EN60849
Dimensions - 305 mm diameter x 259 mm depth from back of baffle (12 in x 10.2 in)
Cutout Size - 282 mm diameter (11.1 in)
Ceiling Thickness Range - Accommodates tiles/drywall up to 70 mm (2.75 in) thick
Suspension Points - Three, on top surface
Weight - 5 kg (11 lb)
Included Accessories - C-ring support backing plate, 2 tile support rails (fits both 2 x 4 ft or 600 x 1200mm tiles), Knockout strain relief, Cutout template, Paint shield, 2 removable locking multi-pin connectors, Grille