JBL VMA1120 5-in/1-out 120W 70V/100V Bluetooth-enabled Mixer / Amplifier NVMA1120-0-US
The JBL VMA1120 is a Commercial Series Bluetooth-enabled mixer/amplifier designed to provide flexible multi-source mixing and amplification for installation in restaurants, educational institutions, fitness centers, and retail stores. It features a 5-in/1-out mixer and 120W of output power. It can be installed in a standard 19" equipment rack with the supplied rackmount kit or set on a surface such as a desk or ledge. Stream music wirelessly via Bluetooth or connect a USB drive to the front-panel USB Type-A port. Route other sources via Euroblock, RCA, and 1/4" input jacks. The integrated mixer offers level controls as well as bass and treble for each channel. Routing to the Euroblock outputs is configurable. The VMA1120 supports voice-activated ducking and priority muting. The front-panel controls and display make operation easy, and remote volume control is possible via a JBL CSR-V module and a standard Ethernet cable (both available separately).
The JBL VMA Series is a cost-effective line of Mixer/Amplifiers with low impedance functionality (4-ohm, 8-ohm) and high impedance 70V and 100V output. They are designed with convenient and flexible features to be used by commercial integrators worldwide, ideal for emerging markets.
Product Features:
5 inputs with 1 output of 120-watts of power
Independent bass and treble controls for each output channel
100V and 70V output, or 4-ohm/8-ohm
Paging Chime, and Priority muting
Works with JBL CSR-V wall controllers
Balanced mic/line inputs; RCA (.775V) inputs
Rack mounting hardware included
Product Specifications:
Max Output Power per Channel: into 4 ohm or 8 ohm; 1kHz, less than or equal to 0.5 percent THD - VMA1120: 120W
Insertion Loss: (70V and 100V outputs) 1dB maximum
Number of Inputs: 5
Number of Outputs: 1
Tone Controls: (Bass and Treble non-detented potentiometers on each channel) Bass +/-14dB at 50Hz; Treble +/-14dB at 10kHz
Input Sensitivity: (to obtain full rated power into 8 ohm load) Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS
Frequency Response: (measured at 2.83VRMS into rated load impedance at any output) 4/8 ohm Output: 20Hz - 20kHz, +/-2dB; 70V/100V Outputs: 80Hz - 15kHz +/-3dB
Total Harmonic Distortion (THD): (measured at 2.83VRMS into rated load impedance at any output) Power Amp Output: less than 0.5 percent, 20Hz - 20kHz
Signal to Noise Ratio: (Ref. Rated Power, mixer levels at min., master volume at max. A-weighted) greater than 76dB
Input Impedance (nominal): Mic: 400 ohm Line: 20 k-ohm (balanced) RCA: 50 k-ohm
Phantom Power: 27VDC
Crosstalk: (reference rated power, volume at mid position, 1kHz) -70 dB
Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz
Minimum Load Impedance: (Low Impedance Output, 70V Output, 100V Output) 4 ohm, 40 ohm, 80 ohm
Operating Temperature/Humidity: 0 degrees C to 35 degrees C at 95 percent R.H. (non-condensing)
Storage Temperature: -20 degrees C to 85 degrees C
Net Weight: 20.2 lb (9.2 kg)
Dimensions: Width: 17.0 in. (432 mm) Depth: 16.3 in. (415 mm) Height: 3.5 in. (88 mm)
Shipping Weight: 25.5 lb (11.6 kg)
