Netgear 8 - Port 10G Smart Managed Pro Switches - MS510TX-100NAS

Item # NETMS510TX100NAS (Part # MS510TX-100NAS)
Not Available
Brand new, USA Warranty
and choose One-Day Shipping at checkout.
Item Description:
8-Port Multi-Gigabit Smart Managed Pro Switch with 10G Copper/Fiber Uplinks

Plenty Of Headroom With 1G; 2.5G; 5G And Even 10G!

Businesses need to be ready for future expansion: with incoming new multispeed devices; their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second. New servers; workstations; storage devices; and motherboards are coming with 802.3bz (NBASE-T) Multi-Gigabit Ethernet for 2.5X to 5X faster speeds up to 100 meters (323 feet) on legacy Cat5E / Cat6 cables.

That is why NETGEAR launched its new 8-Port Multi-Gigabit Smart Managed Pro Switches with 10G Copper/Fiber Uplinks. Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit; the MS510TX and MS510TXPP give the exact speed required; with no downgrade. Also; the new NETGEAR Multi-speed switch ports can connect regular CAT5e Ethernet cables; without the need to upgrade to CAT6 wiring; therefore reducing wiring costs and hassle.

Access; Aggregation Or Collapsed Core

You can now have your PCs; printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet new devices on the same switch; all line-rate. 10G copper and fiber ports are ready for local servers and storage; or high-speed aggregation to your network core.

Comprehensive L2+/Layer 3 Lite Features

NETGEAR Smart Managed Pro Switches offer powerful L2+ and Layer 3 Lite features; enhanced performance and usability. They are purposely designed for converged networks where voice; video; data are all carried on a single network platform. These switches are optimized for network efficiency; operational cost savings; and ease of management. Advanced features such as IPv4/IPv6 Layer 3 static routing; DiffServ QoS; LACP link aggregation and Spanning Tree will satisfy even the most advanced small business networks.

Multi-Gigabit For Future-Proof Deployments

With or without PoE; the switches provide two Multi-Gigabit RJ-45 ports that support 5G; 2.5G; and 1G; another two Multi-Gigabit RJ-45 ports that support 2.5G and 1G; four 1G RJ-45 ports; one dedicated 10G RJ-45 uplink port (which also supports 5G; 2.5G and 1G); and one dedicated SFP+ fiber uplink port that supports 10G and 1G.

Smart IT; not Big IT

No need for an IT expert or a complicated user manual; just configure your network with the user-friendly NETGEAR Smart Managed Pro Web browser-based management GUI. The MS510TX and MS510TXPP are backed by NETGEAR ProSAFE Lifetime Limited Warranty and 24/7 support including lifetime chat.

Product Features:

Hardware features

Multi-Gigabit to connect any type of device to a single switch

  • 2-port RJ-45 Multi-Gigabit Ethernet IEEE 802.3bz (NBASE-T) 100M/1G/2.5G/5G
  • 2-port RJ-45 Multi-Gigabit Ethernet IEEE 802.3bz (NBASE-T) 100M/1G/2.5G
  • 4-port RJ-45 Gigabit Ethernet 10M/100M/1G
  • 1-port RJ-45 10 Gigabit Ethernet Copper (100M/1G/2.5G/5G/10GBASE-T)
  • 1-port SFP+ 10 Gigabit Ethernet Fiber (1G/10GBASE-X SFP+)

MS510TXPP

  • 180W PoE budget available across 8 Gigabit and Multi-Gigabit PoE+ ports (802.3at)
  • Fan-speed control with max 28.8dB at 25 degreeC (77 degreeF) ambient

Non-blocking switching with 78Gbps line rate fabric

  • Get all the connectivity you want to your devices across all 10 ports of Gigabit; Multi-Gigabit and 10 Gigabit Ethernet; without congestion and in full duplex mode

MS510TX

  • No PoE version
  • Fan-speed control with max 21dB at 25 degreeC (77 degreeF) ambient

2-port 10G uplinks (one copper port and one fiber SFP+)

  • Perfect for local 10G server or for uplink and aggregation to your network core

Software Features

Layer 3 static routing with 32 routes (IPv4 and IPv6)

  • Offloads your distribution or core layer routers with local interVLAN routing directly at the edge of your network

Configurable L2 network features (VLANs; Rapid Spanning Tree; IGMP Snooping and Querier; IGMP Fast Leave…)

  • Intuitive Web management streamlines initial configuration for rapid onboarding at the access layer of your network

Advanced Smart Switching features (IPv4/IPv6 Layer 3 static routing; DiffServ QoS policies; LACP Link Aggregation; Broadcast control; Denial of service protection

  • Will satisfy even the most advanced small and medium organizations

Easy-to-use Web browser-based management GUI

  • No need for an IT expert or a complicated user manual; just configure your network with the user-friendly NETGEAR Smart Managed Pro Web GUI

Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling

  • Simplifies management of Wireless APs; IP security cameras; LED lighting; secure access door locks; IoT devices…

Traffic Management

  • Auto Negotiation of speed and duplex modes
  • IEEE 802.3x Flow Control
  • Dynamic MAC address management
  • IEEE 802.1Q-based VLAN
  • Auto Voice VLAN
  • Auto Video VLAN
  • VLAN routing
  • QoS based on WRR; strict priority; or both
  • Port-based and IEEE 801.2p-based QoS
  • TCP/UDP-based QoS
  • DiffServ
  • IPv4 and IPv6-based QoS
  • DSCP Support
  • Rate Limiting (ingress; or egress)
  • Link Aggregation and LACP

Security

  • MAC lockdown
  • MAC lockdown by number of MACs
  • IEEE 802.1x port authentication - EAP
  • Dynamic VLAN Assignment
  • Guest VLAN
  • TACACS+
  • 3 HTTPS /SSL versions
  • TLS session
  • Trusted MAC
  • IPv4; L4-based Access Control List (ACL)
  • IPv6-based ACL

Multicast Efficiency

  • IGMP snooping; v1; v2 and v3
  • IGMP Snooping queried
  • Blocking of unknown multicast traffic
  • MLD snooping

Spanning Tree; Routing and Stacking

  • IEEE 802.1D; IEEE 802.1w RSTP and MSTP
  • Option to enable/disable BPDU flooding when STP is disabled
  • IPv4 / IPv6 Static routing with 32 static routes each
  • Hosted ARP table size of 512

Reliability; Performance and Troubleshooting

  • Port mirroring both on ingress and egress traffic
  • Jumbo frame support
  • Broadcast Storm control
  • Cable diagnostics
  • Loop Detection
  • DoS Prevention
  • IEEE 802.1ab LLDP
  • LLDP-MED
  • Dual Image
  • SNTP
  • Option to enable/disable the flooding of EAPOL when 802.1x is disabled
  • Protected ports
  • DNS client
  • DHCP client
  • DHCP snooping
  • Ping and traceroute client
  • Energy Efficient Ethernet (IEEE 802.3az) compliant

Switch Management

  • Web browser-based management GUI
  • Smart Control Center Software for multi-switch management
  • IP Access List
  • IPv6 Management
  • Configurable Management VLAN
  • SNMP v1/v2c and v3
  • Standard MIBs (RFC1213; RFC1643; and RFC1493)
  • RMON group 1; 2; 3; 9
  • Firmware Upgrade through Smart Control Center (TFTP)
  • Firmware download (to switch) and upload (to server) through TFTP/HTTP
  • Configuration and Image Upload (to PC) through HTTP
  • Configuration Download (to Switch) thru TFTP/HTTP and upload (to server)
  • Memory & FLASH log
  • Syslog (server)
  • System password protection

Specifications:

  • Gigabit ports: 4 (10M/100M/1G)
  • 2.5-Gigabit ports: 2 (100M/1G/2.5G)
  • 5-Gigabit ports: 2 (100M/1G/2.5G/5G)
  • 10-Gigabit copper ports: 1 (100M/1G/2.5G/5G/10GBASE-T)
  • 10-Gigabit fiber SFP+ ports: 1 (1G/10GBASE-X SFP+)
  • Switching fabric: 78 Gbps line rate
  • Max MAC entries: 16K
  • Buffer size: 3MB
  • VLAN (Number Supported): 256
  • VLAN routing: Yes
  • Dynamic VLAN assignment: Yes
  • MLD Snooping: Yes
  • Static route: Yes (32 IPv4 + 32 IPv6)
  • Host ARP table: Yes (512)
  • EEE: Yes
  • DoS Prevention: Yes
  • Internal/External: Internal 100-240VAC 50-60Hz
  • Max consumption (Watts): 26.1W
  • FAN: 1
  • Acoustic Noise Level 25C (dBA): 21
  • Operating Temperature: 0 degree to 50 degree C
  • MTBF at 25 degree C: 1;078;683 hrs.
  • Dimensions: 328 x 169 x 43 mm
  • Weight: 1.42 kg
This Kit Includes: