1,200 Watt Class-D Mono Amplifier
The PRIME R1200-1D is an ultra-efficient mono amplifier that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers.
The Prime R1200-1D amplifier offers high efficiency through the implementation of its Class-D circuitry while delivering rich, full bass to any system. This amplifier is optimized for subwoofers with the implementation of an infrasonic filter to keep those ultra-low (inaudible) bass notes from damaging your subwoofer system. Match with a 4-channel stereo amplifier for your mids/highs and you'll have a Rockford Fosgate system that any Car Audio Fanatic will envy.
Product Features:
- 12dB/octave Butterworth crossover
- Infrasonic filter
- Remote PLC (Punch Level Control)
- RCA pass-thru outputs
- Real time output and power supply thermal sensing
- Cast aluminum heatsink
- Top mounted controls
- 4 Gauge power/ground connectors
- MOSFET power supply
- Short circuit protection
- Muted turn on
- 1 Year Standard Warranty
Product Specifications:
- CEA-2006 Compliant: CEA-2006 Power Rating, 400W x 1 at 4 ohms, less than or equal to 1.0 percent THD+N
- Number of Channels: 4
- Rated Power (RMS Continuous Power): 400 Watts x 1 at 4-Ohm, 800 Watts x 1 at 2-Ohm, 1200 Watts x 1 at 1-Ohm
- Total Power (Sum of Rated Power): 1200 Watts RMS
- Dynamic Power (PVC/PowerCube): 499 Watts x 1 at 4-Ohms 0 degrees Res, 898 Watts x 1 at 2-Ohms 0 degrees Res, 1,400 Watts x 1 at 1-Ohm 0 degrees Res
- Bridgeable: No
- Frequency Response: 20Hz to 250Hz +/-1dB
- Efficiency (average): 85 percent at 4-Ohm, 85 percent at 2-Ohm, 80 percent at 1-Ohm
- Total Harmonic Distortion (THD+Noise): 4-Ohm: less than 1.0 percent, 2-Ohm: less than 1.0 percent, 1-Ohm: less than 1.0 percent
- Crossover Controls: Low-Pass: Variable 50Hz - 500Hz at 12dB/Octave
- Tone Controls: 0dB to +18dB at 45Hz
- Input Sensitivity: 150 mV to 4 V
- Signal Input: Low Level: 1 RCA Pair
- Signal Output: Low Level: 1 RCA Pair
- Power Input Connector: Block
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Block
- Speaker Wire Gauge: 12 AWG
- Heat Sink Type: Cast aluminum
- Cooling: Convection
- Remote Controls: Variable 0dB to +12dB at 45Hz
- Visual Indicators: Power, Protect
- Circuit Topology Class: Class-D
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 150 A
- Max. Current Draw (13.8V Sinewave): 110 A
- Average Current Draw (13.8V Music): 55 A
- Suggested Alternator: 100 A
- Shipping Weight: 7.825 Lbs. (7.82 Kg.)
- Dimensions (HxWxL): 1.97" x 6.77" x 11.06", (5cm x 17.20cm x 28.10cm)
