Ubiquiti Networks launches the latest generation of airMAX CPE (Customer Premises Equipment); the LiteBeam 5AC Gen 2; with dedicated Wi-Fi management.
Improved Noise Immunity
The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction; the LiteBeam 5AC Gen 2 blocks or spatially filters out noise; so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
Innovative Design
Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna; so there is no need for a cable. This improves performance because it eliminates cable losses.
Featuring high performance and innovative mechanical design; the LiteBeam 5AC Gen 2 is versatile and cost-effective to deploy.
Software
airOS 8: airOS v8 is the revolutionary operating system for Ubiquiti airMAX ac products.
Powerful Wireless Features: Access Point PtMP airMAX Mixed Mode; airMAX ac Protocol Support; Long-Range Point-to-Point (PtP) Link Mode; Selectable Channel Width - PtP: 10/20/30/40/50/60/8; PtMP: 10/20/30/40 MHz; Automatic Channel Selection; Transmit Power Control: Automatic/Manual; Automatic Distance Selection (ACK Timing); Strongest WPA2 Security.
Usability Enhancements: airMagic Channel Selection Tool; Redesigned User Interface; Dynamic Configuration Changes; Instant Input Validation; HTML5 Technology; Optimization for Mobile Devices; Detailed Device Statistics; Comprehensive Array of Diagnostic Tools; including RF Diagnostics and airView Spectrum Analyzer.
UNMS App
The LiteBeam 5AC Gen 2 integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
Accessing airOS via Wi-Fi: The UNMS app provides instant accessibility to the airOS configuration interface and can be downloaded from the App Store (iOS) or Google Play (Android). UNMS allows you to set up; configure; and manage the LiteBeam 5AC Gen 2. It offers the following options once you're connected or logged in to the device: Status - Check link status information or the basic configuration settings of the LiteBeam 5AC Gen 2. Configuration - Change or update the existing configuration of the LiteBeam 5AC Gen 2. Tools - Access tools for initial installation and configuration of the LiteBeam 5AC Gen 2. Actions - Back up or update the configuration; upload new firmware; reboot the device; reset the device to factory defaults; access the airOS UI in the web browser; or disconnect from the LiteBeam 5AC Gen 2.
Models
The LiteBeam 5AC Gen 2 offers quick and easy alignment and enhanced protection against power surges.
The LBE-5AC-Gen2 features a robust mount with separate azimuth and elevation adjustments.
Product Features:
- Lightweight; Low-Cost Solution
- Full Adjustment Flexibility
- Quick Assembly and Installation
Specifications:
Mechanical
- Wind survivability: 200 km/h (125 mph)
- Wind loading: 275 N at 200 km/h (61.8 lbf at 125 mph)
Hardware
- Networking interface: (1) GbE RJ45 port
- Power method: Passive PoE 2-pair (4; 5+; 7; 8 return)
- Power supply: 24V; 0.3A gigabit PoE adapter (Included)
- Supported voltage range: 22-27 VDC
- Max. power consumption: 7W
- Max. power output: 25 dBm
- Gain: 23 dBi
- Ambient operating temperature: -40 to 70 degree C (-40 to 158 degree F)
- Ambient operating humidity: 5 to 95% noncondensing
- Certifications: CE; FCC; IC
- NDAA Compliant: Yes
Operating Frequency (MHz)
- Worldwide: 5150-5875 MHz
- USA:
- U-NII-1: 5150-5250 MHz
- U-NII-2A: 5250-5350 MHz
- U-NII-2C: 5240-5725 MHz
- U-NII-3: 5725-5850 MHz
Management Radio (MHz)
- Worldwide: 2412 - 2472 MHz
- US/CA: 2412 - 2462 MHz
Dimensions
- Dimensions (W x H x D): 358 x 271.95 x 272.5 mm (14.1 x 10.7 x 10.7 in.)
- Weight:
- Without mount: 800 g (1.8 lb)
- With mount: 980 g (2.2 lb)
