This compact; second-generation NFC card reader and request-to-exit device offers advanced features like hand-wave door unlocking. It provides a secure and efficient entry system for both residential and commercial spaces.
Product Features:
- Weather-resistant (IP55 rating) with operating temperatures from -30 to 45 degreeC
- Connects to the access hub via PoE
- Entry and exit greeting messages
- Hand-wave unlock functionality for convenience
- Unlock using an NFC card or mobile app
Specifications:
Overview
- NFC Card & Keyfob Access: Yes
- Mobile Unlock: Yes
- Handwave Request to Exit: Yes
- NDAA Compliant: Yes
- UL 294 Level:
- Destructive attack: Level I
- Line security: Level I
- Endurance: Level I
- Standby power: Level I
- Weatherproofing: IP55
Mechanical
- Enclosure Material: Polycarbonate; glass
- Mount Material: Aluminum alloy
- Mounting: In-wall; gang box (Included); Junction box (Optional)
Hardware
- Indoor and Outdoor Use: Yes
- Ambient Operating Temperature: -30 to 45 degree C (-22 to 113 degree F)
- Ambient Operating Humidity: 5 to 90% noncondensing
- Networking Interface: (1) 10/100 MbE RJ45 port
- Connectivity: BLE 4.1; NFC
- Power Method: PoE; UL 294 Power-limited Class 2 PSU; UL 60950-1/62368-1 LPS/PS2 PSU
- Max. Power Consumption: 5W
- Supported Voltage Range: 48 VDC
- ESD/EMP Protection: Air: +/-15kV; contact: +/-8kV
- Sensors: Proximity sensor
- Speaker: Yes
- LEDs: R/G/B/W
- Button: (1) Factory-reset
- NFC Frequency: 13.56 MHz
- NFC Read Range: < 30 mm (1.18")
- NFC Technology:
- ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
- MIFARE Classic / MIFARE DESFIRE
- Sony FeliCa (ID only)
- NFC Forum tags T1T; T2T; T3T; T4T and T5T
- PoE Cabling Requirements:
- Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
- The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm ) for patch cords; 24 AWG (0.21 mm ) for horizontal or riser cable.
- UL 294 Statement:
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
- The equipment is intended to comply with the section of the National Electrical Code; ANSI/NFPA 70; Article 725.121; Power Sources for Class 2 and Class 3 Circuits.
- CAN/ULC-60839-11-1 Grade: Grade assignment: I
- Certifications: CE; FCC; IC; SRRC; UL 294; CAN/ULC-60839-11-1
- Document number; and issue date and/or revision level: UA-G2/UA-G2-Black; V02
Software
- Management Application: Access
Dimensions and Weight
- Dimensions (H x W x D): 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4 in.)
- Weight: 82 g (2.9 oz)
