NWA1123-AC PRO stylish outlook and extraordinary throughput
The Zyxel NWA1123-AC PRO 802.11ac Hybrid access point supports a combined data rate of up to 1.75Gbps. With Zyxel's innovative dual-optimized antenna design and commitment to "RF First" for high performance and reliable connections through design; the NWA1123-AC PRO delivers increased coverage and improved connection speeds for every client.
The NWA1123-AC PRO supports NebulaFlex; giving you the ability to easily switch between standalone and our license free Nebula cloud management; anytime; with a few simple clicks.
Best Interior Wifi Performance In Style
Struggling between performance and environment cohesion when deploying business wireless APs is in past. The stylish exterior of NWA1123-AC PRO is suitable for any interior that not only outperforms but also blends into the interior better as well prevents equipment theft.
Optimize For What You Need
To create a thoroughly enhanced WiFi experience; NWA1123-AC PRO made a big move on optimized antennas and RF design via fine-tune software and innovative hardware. Featuring with DCS and load-balance; NWA1123-AC PRO delivers smooth and superior WiFi experience in workplaces.
Built for Superior performance
The NWA1123-AC PRO is built with a dual-optimized antenna module; premium power amplifiers and low-noise elements to deliver superior wireless performance.
Setup and forget
The refreshed NWA1123-AC PRO features streamline controller-less deployment. Out of the box and finish three steps configuration with ZON then NWA1123-AC PRO capable of operating autonomously without extra computer or special management tool as well as allowing administrator easy monitor via any SNMP tool in hand; even not a networking expert can handle it easily.
Blending multi-operation flexibility with practical business features
NWA1123-AC PRO provides repeater/root-AP mode compatibility with Zyxel Unified Pro and Unified APs; that users can extend wireless connectivity via enterprise grade WDS to difficult cabling locations without the bother of troublesome cabling. Also; as an ideal solution; NWA1123-AC PRO offers an array of practical features like multiple SSID and solid WiFi security.
Product Features:
- Dual-optimized antenna for wall/ceiling-mount installations
- Enterprise class 802.11ac AP supports combined data rates of up to 1.75 Gbps
- Better coverage with optimized antenna and RF design
- Flexible operating modes (stand-alone; root-AP/ repeater mode)
- Reliable software and robust hardware design
- Set up and forget offers better-than-ever WLAN experience
Specifications:
Main Design
- Wireless frequency: 2.4 GHz & 5 GHz
- Radio: 2
Frequency band
2.4 GHz (802.11 b/g/n)
- USA (FCC): 2.412 to 2.462 GHz
- Europe (ETSI): 2.412 to 2.472 GHz
5 GHz (802.11 a/n/ac)
- USA (FCC): 5.15 to 5.25 GHz; 5.725 to 5.850 GHz
- European (ETSI): 5.15 to 5.35 GHz;
- 5.470 to 5.725 GHz
802.11 premium features
- 3x3 Multiple-Input Multiple-Output (MIMO) with three spatial streams
- Maximal Ratio Combining (MRC)
- 20-; 40- and 80-MHz channels
- PHY data rates total up to 450 Mbps (11n) + 1.3 Gbps (11ac)
- Packet aggregation: A-MPDU (Tx/Rx); A-MSDU (Tx/Rx)
- Cyclic Delay diversity (CSD) support
- Maximum Likelihood Demodulation (MLD) support
- Low Density Parity Check (LDPC) support
Typical transmit output power (dBm)
- US (FCC) 2.4 GHz : 27
- US (FCC) 5 GHz : 27
- EU (ETSI) 2.4 GHz : 18
- EU (ETSI) 5 GHz : 24
Number of antenna
Antenna gain
2.4 GHz
- Ceiling: 3 dBi
- Wall: 4 dBi
5 GHz
- Ceiling: 4 dBi
- Wall: 5 dBi
Support data rate
- 802.11a/g: 1; 2; 5.5; 6; 9; 11; 12; 18; 24; 36; 48; and 54 Mbp
- 802.11n: up to 450 Mbps in MCS15 (40 MHz)
- 802.11ac: up to 1300 Mbps in MCS9 (80 MHz)
Receive sensitivity
- Min. Rx sensitivity to -102 dBm
LAN
- Number of 10/100/1000M LAN: 2
- PoE: Yes
- PoE power draw: 12.48 W (802.3at PoE)
WLAN Security
- WEP: Yes
- WPA/WPA2-PSK: Yes
- WPA/WPA2-Enterprise: Yes
- EAP type: EAP-TLS; EAP-TTLS; EAP-PEAP; EAP-FAST; EAP-AKA and EAP-SIM
- WMM: WiFi compliant
- IEEE 802.1X: Yes
- Number of multiple SSID: 16
- MAC filtering: Yes
- L2 Isolation: Yes; multiple profile
- RADIUS authentication: Yes
Network
- IPv6 support: Yes
- VLANs: Yes
- DHCP client: Yes
Zyxel One Network - ZON Utility
- Discovery of Zyxel switches; APs and gateways
- Centralized and batch configurations: IP configuration; IP renew; Device reboot; Device locating; Web GUI access; Firmware upgrade; Password configuration; One-click quick association with Zyxel AP Configurator (ZAC)
Management
- Zyxel AP Configurator: Batch AP configuration; Batch AP firmware upgrade; Batch AP profile backup
- Standalone AP mode: Yes
- CLI: Yes; SSH
- SNMP: Yes
Others
- Plenum rating: Yes
- Power supply: 802.3at PoE only (No DC jack)
- MTBF (hr): 1005235
Standard Compliance
- Ethernet: IEEE 802.3; IEEE 802.3u; IEEE 802.11ab; IEEE 802.3au; IEEE 802.3az; IEEE 802.3at
- WLAN: 802.11b: DBPSK; DQPSK; CCK; 802.11g: BPSK; QPSK; 16-QAM; 64-QAM; 802.11a: BPSK; QPSK; 16-QAM; 64-QAM; 802.11n: BPSK; QPSK; 16-QAM; 64-QAM; 802.11ac: BPSK; QPSK; 64-QAM; 256-QAM
Certifications
- Radio: FCC Part 15C; FCC Part 15E; ETSI EN 300 328; EN 301 893; LP0002
- EMC: FCC Part 15B; EN 301 489-1; EN 301 489-17; EN55032; EN55024; EN61000-3-2/-3; BSMI CNS13438
- Safety: EN 60950-1; IEC 60950-1; BSMI CNS14336-1
Physical Specifications and others
- Dimensions (W x D x H)(mm/in.): 203.9 x 191.7 x 34.7/8.03 x 7.55 x 1.37
- Weight (g/lb.): 445/0.98
- Included accessories: PoE Injector; Ethernet 45 cable; Wall/Ceiling-mount plate
Environmental Specifications
- Operating Temperature: 0 degreeC to 50 degreeC/32 degreeF to 122 degreeF
- Operating Humidity: 10% to 90% (non-condensing)
- Storage Temperature: -40 degreeC to 70 degreeC/-40 degreeF to 158 degreeF
- Storage Humidity: 10% to 90%